Outlined Watch Face

Review by eFreeware

Outlined Watch Face is a paid watch face for Wear OS smartwatches, made by amoledwatchfaces. It costs $0.99, carries no ads and has no in-app purchases, so the price you see is the whole cost. The pitch is simple: an outlined digital clock on a true black background, with enough configuration options to keep it from looking like everyone else's face.

What draws me to it first is the restraint. A digital watch face lives on your wrist all day, and the outlined numerals sit somewhere between a plain seven-segment readout and a custom typeface, which gives the screen some character without turning it into a billboard. The developer lists ten outlined font options, so the look can shift quite a bit before you touch anything else.

It is built on Watch Face Format, and the developer is clear that it runs on Wear OS 4 and newer. It is also not made for rectangular watches, which is worth checking before buying if your watch has a square display. With over 10,000 installs and a 4.3 average from 326 ratings, it has found a reasonable audience for a niche paid face.

A digital clock you can actually customize

The core of the face is the outlined digital clock, and the customization runs deeper than font choice. There are more than sixty Material color themes, and the developer describes them as unique Material You themes, which suggests they pick up the palette language Google uses across its own interfaces. A subtle mesh background can be switched on or off behind the numerals, and an am-pm slot can be toggled so one complication becomes a 12-hour indicator instead of showing something else.

The recent updates add a couple of useful twists. A toggle switches between solid and outlined font variants, and a Google Sans Flex font option joins the list, both tied to newer format versions. A leading zero setting for the digital clock arrived for Wear OS 5 and above, which matters if you prefer a fixed-width look rather than hours that jump between one and two digits.

For anyone who treats a watch face as a small design project rather than a fixed download, this is the section that earns the purchase. The settings exist to make the face yours, not to add features you will never open again.

Complications, gradients and battery readouts

The face supports eight custom complication slots, including two custom app shortcuts, so you can put the data you actually check on the screen rather than whatever the default happens to be. Two of those slots are gradient arcs, and the developer says each progress bar gradient can be customized individually when a ranged value complication is used. There are nineteen gradients to choose from, plus white and a tint option.

The standout complication is the combined watch and phone battery readout, which puts both charge levels in one place. For anyone who spends the day moving between a watch and a phone, that is a genuinely useful pairing to have on the wrist rather than buried in a settings screen. A tint icons toggle makes monochromatic icon complications match the rest of the theme instead of clashing with it.

There is also an optional wave-styled seconds indicator, which is the sort of detail that either appeals immediately or does not. It is a toggle, so the face works fine without it, but it adds motion to an otherwise static layout.

Always-on styles and battery care

Battery life is where watch faces usually give themselves away, and this one addresses it in a few ways. The background is true black. The app includes burn-in protection.

There are three always-on display styles, and one of them uses only the digital clock while offloading the rest to the watch's microcontroller. That option is meant as a battery gain, and it is the kind of setting worth trying if you keep always-on enabled and notice your watch struggling to reach the end of the day.

The developer says the face suits Pixel Watch 2 and Galaxy Watch6 and keeps battery use low. Those are the two models named, so owners of other round Wear OS 4 watches will be relying on the general platform support rather than a specific compatibility note.

What you need before installing

The requirements are short and worth reading before you spend the $0.99. The app is only for Wear OS 4 or newer devices, and it is not suitable for rectangular watches. If your watch is square, this is not the face for it, and no amount of customization will change that.

There is an installation and troubleshooting guide on the developer's site, along with a support email and a Telegram group for live help. There is also a buy-one-get-one offer mentioned on the developer's site, which is relevant if you are considering more than one of their faces at the same time.

The app was released in April 2024 and was still receiving updates as of August 2026, with recent versions adding format support, font options and small refinements. That pattern suggests a face that gets maintained rather than left to sit.

Who this face suits

This is a face for someone who wants a digital readout with a strong typographic identity and does not mind spending a few minutes in the settings to get there. The outlined numerals are the whole point, and if that look appeals, the font variants, color themes and gradient options give you plenty of room to make it distinct from the stock face your watch shipped with.

It also suits people who care about battery behavior. The true black background, burn-in protection and the always-on style that leans on the microcontroller are all listed features. If you keep always-on display enabled and want a face that respects that choice, the options here are pointed in the right direction.

The price is low enough that the decision is mostly about taste. There is no ad-supported tier to sit through and nothing to buy after the fact, so the only question is whether the outlined style and the configuration depth match what you want on your wrist.

A considered pick for round Wear OS watches

Outlined Watch Face does one thing and does it with a lot of options attached. The outlined digital clock, the gradient arc complications, the dual battery readout and the always-on choices add up to a face that rewards a little setup time. At $0.99 with no ads and no in-app purchases, there is no ongoing cost to weigh against that.

The limits are clear and stated up front: Wear OS 4 and newer only, and no support for rectangular watches. If your device meets those conditions and you like the outlined look, this is an easy recommendation. If your watch is square, or you prefer a round analog dial, the design here simply is not aimed at you.

For round-watch owners who want a black-background digital face they can tune in detail, this is a straightforward buy. It has been updated regularly since its April 2024 release, and the 4.3 average across 326 ratings suggests buyers have generally been satisfied with what they paid for.

What's new

v1.3.3 • added Outlined Font toggle (switch between solid and outlined font variant)* • added Google Sans Flex font option* * wff3+ only v1.3.1 • added wff3 version • small watchface.xml improvements v1.3.0 • added digital clock leading zero setting (Wear OS 5+) v1.2.9 • dual batteries icon colors final fix v1.2.6 • added WFF 2 version • added Wear OS 5 flavors • switched to unified watchface.xml v1.2.5 • dual batteries slot improvements ...